Vertex Standard VXD-7200 Operating Manual Download Page 19

Page: 19 / 84

NOTE

: There is no power up tone if the radio

tones/alerts function is disabled (see

Turn-

ing the Radio Tones/ Alerts On or Off

page 76).

If your radio does not power up, contact your dealer.

To turn off the radio, press and hold the On/Off

Button until you see “

Powering Down

” on the radio’s

display.

Adjusting the Volume

To increase the volume, turn the

Volume Knob

clockwise.

To decrease the volume, turn this knob counter-

clockwise.

etting

tarte

NOTE

: The Home screen does not light up during

a power up if the LED indicator is disabled

(see

Turning the LED Indicator On or

Off

on page 77).

A brief tone sounds, indicating that the power up

test is successful.

Powering Up the Radio

Press the

On/Off Button

briefly.

The green LED blinks and the Home screen lights

up if the backlight setting is set to turn on automati-

cally.

On/Off Button

Volume Knob

Summary of Contents for VXD-7200





















































































Search results

Summary of Contents for VXD-7200

Reviews:

Related manuals for VXD-7200

Brands by name

Popular brands

Vertex Standard VXD-7200, Operating Manual

Search results

Summary of Contents for VXD-7200

Reviews:

Related manuals for VXD-7200

Brands by name

Popular brands