Vertex Standard VXD-7200, Operating Manual

Page: 64 / 84

62
1
Deleting a Saved Text Message from Drafts
Procedure :
Press the programmed Text Message button and
proceed to Step 3.
OR
Follow the procedure below.
1
MENU
to access the menu.
2
or to “
Messages
” and press
ENTER
to se-
lect.
3 or to “
Drafts
” and press
ENTER
to select.
4 or to the required message and press
ENTER
to select.
5 or to “
Delete
” and press
ENTER
to delete
the text message.
1
Managing Fail-to-Send Text Messages
You can select one of the following options while at
the “
Resend
” option screen:
• Resend
• Forward
NOTE : If the channel type (i.e. conventional digital)
is not a match, you can only edit and for-
ward a Fail-to-Send message.
1
Resending a Text Message
Procedure :
1 Press
ENTER
to resend the same message to the
same subscriber/group alias or ID.
2 If the message is sent successfully, a tone
sounds and the display shows “
Message Sent
”.
OR
If the message cannot be sent, the display
shows “
Message Send Failed
”.
1
Forwarding a Text Message
Select “
Forward
” to send the message to another
subscriber/group alias or ID.
Procedure :
1
or to “
Forward
” and press
ENTER
to select.
2
or to the required alias or ID and press
[
OK
] to select.
3 The display shows “
Text Message: <Subscriber
/
Group Alias or ID>
”, confirming your message is
being sent.
4 If the message is sent, a tone sounds and the
display shows “
Message Sent
”.
OR
If the message is not sent, a low tone sounds
and the display shows “
Message Send Failed
”.
a
DV
ance
D
f
ea
tures