Vertex Standard VXD-7200 Operating Manual Download Page 63

Page: 63 / 84

If the message cannot be sent, a low tone

sounds the display shows “

Message Send

Failed

”.

Sending a Quick Text Message with the One

Touch Access Button

Procedure

Press the programmed

One Touch Access

but-

ton to send a predefined Quick Text message to

a predefined alias or ID.

The display shows “

Text Message: <Subscriber

Group Alias or ID>

”, confirming your message is

being sent.

If the message is sent successfully, a tone

sounds and the display shows “

Message Sent

”.

If the message cannot be sent, the display

shows “

Message Send Failed

”.

Managing Text Messages in the Drafts Folder

The Drafts folder stores a maximum of ten (10) last

saved messages. When the folder is full, the next

saved text message automatically replaces the old-

est text message in the folder.

Viewing a Saved Text Message

Procedure

Press the programmed

Text Message

button and

proceed to Step 3.

Follow the procedure below.

MENU

to access the menu.

to “

Message

” and press

ENTER

to se-

lect.

to “

Drafts

” and press

ENTER

to select.

to the required message and press

ENTER

to select.

ance

tures

Summary of Contents for VXD-7200





















































































Search results

Summary of Contents for VXD-7200

Reviews:

Related manuals for VXD-7200

Brands by name

Popular brands

Vertex Standard VXD-7200, Operating Manual

Search results

Summary of Contents for VXD-7200

Reviews:

Related manuals for VXD-7200

Brands by name

Popular brands