Vertex Standard VXD-7200 Operating Manual Download Page 12

Page: 12 / 84

Mobile Antenna Installation Guidelines

These mobile antenna installation guidelines are limited to metal body motor vehicles or vehicles with ap-

propriate ground planes.

Antennas should be installed in the center area of the roof or the trunk lid taking into account exposure

conditions of backseat passengers and according to the specific instructions and restrictions in the Radio

Installation Manual along with the requirements of the antenna supplier.

Trunk lid installations are limited to vehicles with clearly defined flat trunk lids, and in some cases, to spe

cific radio models and antennas. See the Radio Installation Manual for specific information on how and

where to install specific types of approved antennas to facilitate recommended operating distances to all

potentially exposed persons.

Use only the Vertex Standard -approved, supplied antenna or a Vertex Standard-approved replace-

ment antenna.

Unauthorized antennas, modifications, or attachments could damage the radio and may

result in non-compliance with RF Safety Standards.

Approved Accessories

This radio has been tested and meets RF Safety Standards when used with the Vertex Standard acces-

sories supplied or designated for this product. Use of other accessories may result in non-compliance with

RF Safety Standards.

For a list of Vertex Standard -approved antennas, visit the following Web site, which lists approved acces-

sories for your radio model:

http://www.vertexstandard.com/lmr.

uct

afety

nergy

osure

Summary of Contents for VXD-7200





















































































Search results

Summary of Contents for VXD-7200

Reviews:

Related manuals for VXD-7200

Brands by name

Popular brands

Vertex Standard VXD-7200, Operating Manual

Search results

Summary of Contents for VXD-7200

Reviews:

Related manuals for VXD-7200

Brands by name

Popular brands