Vertex Standard FTM-10SR Operating Manual Download

Page: 41 / 112

FTM-10SR O

PERATING

ANUAL

CAN

YPE

The

FTM-10SR

has two methods of performing Memory Channel Scan; (1) All Memory

Channel Scanning and (2) Scanning only memory channels which are selected via the Skip/
Preferential memory setting (see next step).

1. Press the front panel

key to switch to the Memory mode, if needed.

2. Press and hold the

key for one second to enter the Memory Channel Customization

mode.

3. Rotate the

DIAL

knob to select Menu Item “

M5 SCN TYPE

”.

4. Press the

key briefly.

5. Rotate the

DIAL

knob to select desired Scan Type:

ALL MEM

: The

FTM-10SR

scans on all Memory Chan-

nels.

ONLY MEM

: The

FTM-10SR

scans only the memory chan-

nels that are appended with the “ONLY” flag
via the Skip/Preferential memory setting.

6. Press the [

VOL/SEL

] key to return to the memory recall

mode. The memory channel frequency will now be displayed.

KIP

REFERENTIAL

CAN

ETTING

The

FTM-10SR

allows you to set up a “Preferential Scan List”. You can “flag” channels

within the memory system. When you initiate the Preferential Memory Scan, only “flagged”
channels will be scanned.

1. Recall the memory channel that you wish to skip. (or Preferential Memory Channel).
2. Press and hold the

key for one second to enter the Memory Channel Customization

mode.

3. Rotate the

DIAL

knob to select Menu Item “

M6 SKIPONLY

”.

4. Press the

key briefly.

5. Rotate the

DIAL

knob to select the desired Scan Type:

SKIP

: This memory channel is skipped during memory

channel scans.

ONLY

: This memory channel scans during preferential

memory scans.

OFF

: This memory channel scans during memory chan-

nel scan.

6. Press the [

VOL/SEL

] key to return to the memory recall mode. The memory channel

frequency will now be displayed.

EMORY

PERATION

Summary of Contents for FTM-10SR

















































































































Search results

Summary of Contents for FTM-10SR

Reviews:

Related manuals for FTM-10SR

Brands by name

Popular brands

Vertex Standard FTM-10SR, Operating Manual

Search results

Summary of Contents for FTM-10SR

Reviews:

Related manuals for FTM-10SR

Brands by name

Popular brands