28
FTM-10SR O
PERATING
M
ANUAL
I
NTERCOM
F
UNCTION
Intercom operation is possible with the
FTM-10SR
, by installing the optional
Bluetooth
®
Adapter unit “
BU-1
” in the radio and using the optional
Bluetooth
®
Headset “
BH-1
”.
When operating in a very noisy environment, (for example, a loud exhaust or engine noise,
or inside an off-road vehicle) communication with a fellow passenger is possible using the
Bluetooth
®
intercom feature.
1. Press the top panel
/
key to select “
INTERCOM
”.
2. Press the
key to activate the Intercom function.
When the Intercom function is activated, the volume level
graphic will be displayed on LCD.
You may switch the receiver audio volume level between “High” and “Low” via the
“VOL.ITCOM” function described below.
When the Intercom function is activated, the internal speakers (front panel and main
chassis) are disabled.
To disable the Intercom function, repeat steps 1 and 2 above.
When set the
key function to “INTERCOM” via the
top panel
/
key, the
key to be used as the Inter-
com feature on/off key.
Important Notice!
Use of a sound-isolating headset while driving on public roads is not lawful and haz-
ardous. An open type headset must be used for safety.
M
ONITOR
FEATURE
The Monitor permits disabling the noise and tone squelch systems temporarily.
When the received signal is weak and the sound from the speaker is intermittent, use this
function to over-ride the squelch and hear the received signal.
1. Press the top panel
/
key to select “
MONI
”.
2. Press the
key.
The noise and tone squelch are disabled while pressing the
key.
When the
key function is set to “
MONI
” via the top panel
/
key, the
key
may be used as the “Monitor” key.
S
MART
M
ENU
F
EATURES
Graphic Bar
