38
FTM-10SR O
PERATING
M
ANUAL
L
ABELING
M
EMORY
You may wish to append an Alphanumeric “Tag” (label) to a memory or memories, to aid in
recollection of the channel’s use (such as a club name, etc.). This is easily accomplished
using the Set (Menu) mode.
1. Recall the memory channel on which you wish to append a label.
2. Press and hold the
key for one second to enter the Memory Channel Customization
mode.
3. Rotate the
DIAL
knob to select Menu Item “
M4 MEM TAG
”.
4. Press the
key briefly, then rotate the
DIAL
knob to se-
lect “
ALPHA
”.
5. Press and hold the
key for one second to display the
previous label.
6. Press the
PTT
key to clear any previous label, if needed.
7. Rotate the
DIAL
knob to select the first digit of the desired label.
8. Press the
key to move to next character.
9. Repeat steps 6 and 7 to program the remaining letters, numbers, or symbols of the
desired label. A total of eight characters may be used in the creation of a label.
10. If you make a mistake, press the
key to backspace the cursor, then re-enter the
correct letter, number, or symbol.
Press the
PTT
key to delete all data after the cursor that may have been previously
stored erroneously.
11. When you have programmed a label that is under eight characters, press and hold in the
key for one second, until the “
ALPHA
” notation appears.
12. Press the [
VOL/SEL
] key to save the label and return to the memory recall mode. The
label (Alpha-Numeric Tag) will now be displayed.
To disable the Alpha-Numeric Tag (enabling the frequency display):
1. Recall the memory channel on which you wish the frequency to display.
2. Press and hold the
key for one second to enter the Memory Channel Customization
mode.
3. Rotate the
DIAL
knob to select Menu Item “
M4 MEM TAG
”.
4. Press the
key briefly. Then, rotate the
DIAL
knob to select “
FREQ
”.
5. Press the [
VOL/SEL
] key to return to the memory recall mode. The memory channel
frequency will now be displayed.
M
EMORY
O
PERATION
