5
FTM-10SR O
PERATING
M
ANUAL
F
RONT
P
ANEL
& T
OP
P
ANEL
Press this key to activate the
function that is selected by the
/
keys.
key
Press and hold this key for two seconds to toggle the
transceiver’s power on or off.
Lock Function:
Press this key momentarily while the transceiver is
turned on to toggle the key lockout feature on or off.
P
You may also lock out the PTT key when the
LOCK mode is activated, by changing Menu Item
“
F22 PTT LOCK
”. See page 87.
POWER key
P
This key switches frequency control between the
VFO and Memory System.
P
In the VFO mode, press and hold this key for one
second to enter the Memory Write mode and then
press this key again to store the frequency into
the memory.
P
In the Memory mode, press and hold this key for
one second to enter the Memory Channel
Customization mode.
key
P
Selects the operating frequency and also selects
the memory channel.
P
Adjusts the receiver audio level when the LED to
the left of the DIAL knob glows red.
P
Select the Smart Menu Item and parameter when
the Smart Menu is activated.
DIAL knob
P
This LED glows red when adjusting the receiver audio level
with the DIAL knob.
P
This LED blinks orange when the Volume Setting Alert fea-
ture is active.
P
This LED blinks yellow when the Timer feature is active.
LED
P
Press these keys to switch the operating band as follows:
2 m Amateur Band
430 MHz Amateur Band
FM BC Band
AM BC Band
WX Band
Audio Line
Group Channel
2 m Amateur Band
P
Press and hold this key for one second (MHz digits will blink), then rotate the DIAL
knob to change the frequency in 1 MHz steps.
keys
