29
FTM-10SR O
PERATING
M
ANUAL
P
UBLIC
A
DDRESS
FEATURE
The Public Address feature enables the output of your voice to the External Speaker.
When an optional
MLS-200-M10
External Speaker is connected, the
FTM-10SR
allows
the transceiver to be used as an 8 W Public Address system.
1. Press the top panel
/
key to select “
PA
”.
2. Press the
key to activate the Public Address feature.
3. Press the
PTT
key, and speak into the microphone in a nor-
mal voice level.
U
You may select the
PTT
key function via Menu Item “
F23 PTT MODE
”.
MOMENT
: While pressing the
PTT
key, the audio is output from the speaker (fac-
tory default).
TOGGLE
:
Once the
PTT
key is pressed the audio is output from the speaker, and
when the PTT key is pressed once again, the audio output is off.
U
Your voice is output to the speaker.
U
The “
P A
” notation appears in the display while the Public Address is activated.
U
Press the [
VOL/SEL
] key to adjust the volume (AF level) of the PA output. While
the RED LED is on, the volume level can be adjusted with the dial knob.
CAUTION!
When the function is changed to the radio mode, the volume level remains the same.
Please be careful about the volume level setting.
U
You may adjust the audio output level by rotating the
DIAL
knob.
To disable the Public Address feature, repeat steps 1 and 2 above.
Note
: Please be careful that the PA function does not cause any
inconvenience or disturbance for others in your area.
R
EVERSE
FEATURE
(
Default “OFF” for USA Version
)
The Reverse feature reverses transmit and receive frequencies while working through a
repeater.
It is often helpful to be able to check the uplink (input) frequency of a repeater, to see if the
calling station is within direct (“Simplex”) range.
1. Press the top panel
/
key to select “
REVERSE
”.
2. Press the
key to activate the Reverse feature.
The “ ” or “ ” or “
” icon will blink while “Reverse”
shift is activated.
3. Press the
key again to revert to the “Normal” shift direction.
S
MART
M
ENU
F
EATURES
Graphic Bar
