Vertex Standard FTM-10SR Operating Manual Download

Page: 88 / 112

FTM-10SR O

PERATING

ANUAL

OLUME

ETTING

LERT

FEATURE

The

FTM-10SR

provides the Volume Setting Alert feature.

1. Press and hold the [

VOL/SEL

] key for one second to activate the Menu mode.

2. Rotate the

DIAL

knob to select Menu Item “

F4 AF PREST

”.

3. Press the

key to enable selection of this Menu item.

4. Rotate the

DIAL

knob to select the desired effect level.

OV ALERT

: Activates the Volume Setting Alert feature. A lamp at the left of the

DIAL

knob blinks orange when volume level is set to the ±3 steps of the preset
level.

LV ALERT

: Activates the Volume Setting Alert feature. A lamp at the left of the

DIAL

knob blinks orange when volume level is set to the preset level minus 3
steps.

HV ALERT

: Activates the Volume Setting Alert feature. A lamp at the left of the

DIAL

knob blinks orange when volume level is set to the preset level plus 3 steps
above.

OFF

Disable the Volume Setting Alert feature.

5. Press and hold the

key for one second, then rotate the

DIAL

knob to select the

desired preset level.

6. Press the [

VOL/SEL

] key to save the new setting and exit to normal operation.

PEAKER

ELECTION

You may choose the speaker to be used.

1. Press and hold the [

VOL/SEL

] key for one second to activate the Menu mode.

2. Rotate the

DIAL

knob to select Menu Item “

F34 SPEAKER

”.

3. Press the

key to enable selection of this Menu item.

4. Rotate the

DIAL

knob to select the desired the speaker to be used.

REAR

: Outputs the receiving audio from the “SP/LINE-IN” connector (located in the

transceiver’s body).

F+R

Outputs the receiving audio from both FRONT speaker (located in the front
panel) and “SP/LINE-IN” connector.

FRONT

: Outputs the receiving audio from the FRONT (located in the front panel) speaker.

OFF

: Disable the FRONT speaker and “SP/LINE-IN” connector.

5. Press the [

VOL/SEL

] key to save the new setting and exit to normal operation.

If you use the external speaker, this Menu Item is set to “

REAR

” or “

F+R

”.

ISCELLANEOUS

ETTING

Summary of Contents for FTM-10SR

















































































































Search results

Summary of Contents for FTM-10SR

Reviews:

Related manuals for FTM-10SR

Brands by name

Popular brands

Vertex Standard FTM-10SR, Operating Manual

Search results

Summary of Contents for FTM-10SR

Reviews:

Related manuals for FTM-10SR

Brands by name

Popular brands