FT-2000
Operating Manual
Vertex Standard Co., Ltd.
126
118 tun AM STEP
Function: Selects the tuning steps for the microphone’s [UP]/[DWN] keys in the AM
mode.
Available Values: 2.5/5/9/10/12.5 kHz
Default Setting: 5 kHz
119 tun FM STEP
Function: Selects the tuning steps for the microphone’s [UP]/[DWN] keys in the FM
mode.
Available Values: 5/6.25/10/12.5/25 kHz
Default Setting: 5 kHz
120 tun FM DIAL
Function: Setting of the Main Tuning Dial knob’s tuning speed in the FM mode.
Available Values: 10/100 Hz
Default Setting: 100 Hz
121 tun MY BAND
Function: Programs a band to be skipped while selecting bands using the [SUB VFO-B]
knob.
Available Values: 1.8 ~ 50/GE/AU
Default Setting: AU
To program the band to be skipped, rotate the [SUB VFO-B] knob to recall the band to
be skipped while selecting bands via the [SUB VFO-B] knob, then press the [ENT]
button to change this setting to “ON” (“d” notation will replace “E” notation). Repeat
the same procedures to cancel the setting (skipped “Off”: “d” notation appears).
TX AUDIO Group
122 tAUd EQ1 FRQ
Function: Selects the center frequency of the lower range for the parametric
microphone equalizer.
Available Values: OFF/100 ~ 700 Hz (100 Hz/step)
Default Setting: OFF
OFF:
The equalizer gain and Q-factor are set to factory defaults (flat).
100 ~ 700: You may adjust the equalizer gain and Q-factor at this selected audio
