FT-2000
Operating Manual
Vertex Standard Co., Ltd.
24
67. M CH Switch
Pressing this button allows you to select the memory channel using the [SUB VFO-B]
knob.
68. (VFO-B) BAND Switch
When the [A/B] button is pressed, and the Orange lamp to the right of the [SUB
VFO-B] knob lights up, pressing this button allows you to select the Sub (VFO-B)
operating band (Amateur bands) using the [SUB VFO-B] knob.
69. (VFO-B) MHz Switch
When the [A/B] button is pressed, and the Orange lamp to the right of the [SUB
VFO-B] knob lights up, pressing this button allows you to tune the Sub band (VFO-B)
frequency down or up in 1 MHz increments, using the [SUB VFO-B] knob.
70. FAST Switch
When the [A/B] button is pushed, and the Orange lamp to the right of the [SUB
VFO-B] knob lights up, the [SUB VFO-B] knob will be controlling the Sub band
(VFO-B) frequency; pressing the [FAST] button will increase the tuning rate by a factor
of 10.
71. A/B Switch
The [A/B] button determines whether the actions of the [SUB VFO-B] knob will be
applied to the Main band (VFO-A) or the Sub band (VFO-B).
Pressing this button once causes the Orange lamp to the right of the [SUB VFO-B]
knob to light up; in this case, rotation of the [SUB VFO-B] knob affects operation on
the Sub band (VFO-B). Pressing the [A/B] button once more causes the Orange lamp to
turn off; in this instance, rotation of the [SUB VFO-B] knob affects operations
associated with the Main band (VFO-A).
Display Indications
1. Receiver Configuration Indicator
ANT (1, 2, RX):
Indicates the antenna selected for operation by the front panel [1/2] and [RX]
antenna switch.
ATT (OFF, –6 dB, –12 dB, –18 dB):
Indicates the attenuation level selected for operation by the front panel [AGC]
