![background image](http://html1.mh-extra.com/html/verizon/centrex-custopak/centrex-custopak_manual_1005204027.webp)
50
51
DMS 10 INTERCOM CODE CHART
Name
Code
Telephone Number
#2
#3
#4
#5
#6
#7
SPEED CALLING LIST CHARTS
The following charts are provided for you to list your Speed Calling
codes. The length of your individual speed calling list is determined
by your switch type. Your switch type can be found on the front
cover of this guide. Be sure to use the Speed Calling list that
corresponds to your switch type. The instructions for setting up a
list and making calls using Speed Calling can be found below and
also on page 28 of this guide.
To establish or change your Speed Calling list:
Lift the receiver.
Listen for dial tone.
Press
.
Listen for dial tone.
Press the Speed Code Number to be programmed.
Dial the telephone number to be assigned to the code.
Listen for confirmation tone.
Hang up.
Repeat steps for each Speed Dialing code number to
be programmed.
To make a call:
Lift the receiver.
Listen for dial tone.
Press
plus the speed code for 1A and EWSD switch types.
OR,
Press
plus the speed code for 5E, DMS 10, DMS 100 and SIP
switch types.
You will hear the called number ringing.