6
Operation and maintenance, Discfilter HPF2200-series PFLC
2. SAFETY INSTRUCTIONS
Hydrotech Discfilters in the HPF2200 series are designed for safe operation provided they are in-
stalled correctly and used in accordance with the enclosed instructions. The equipment must be
installed correctly and adapted in accordance with local regulations. This equipment is designed
for use by one or more operators. You must read the relevant sections of this manual before using
the equipment or carrying out maintenance work.
⊲
Pay attention to all warning symbols that appear in this manual. If this information is ignored
it may result in serious personal injury and/or damage to equipment.
⊲
Assume all electrical equipment to be live.
⊲
Assume all hoses and pipes to be pressurised.
⊲
Before carrying out maintenance work, the main power switch (see Figure 2.3) must be turned
to the OFF (0) position and locked with a padlock.
⊲
Maintenance and service may only be performed by authorised personnel.
⊲
Adequate lighting should be used while operating the filter and when working in close prox-
imity to the filter.
2.1 Warning symbols
Warning symbols are used in this manual to draw attention to potentially dangerous situations:
Information that warns you of a potential risk of personal injury and/or damage to equip-
ment.
Warning stickers (see Figure 2.1) are attached to the filter to warn personnel and act as a remin-
der to keep hands and fingers away from the filter’s moving parts.
2.2 CE marking
This equipment is CE marked (see Figure 2.2), which guarantees that the equipment is designed,
manufactured and described in accordance with the requirements set out in the EU Machinery
Directive.
Figur 1
Figur 2.1
Figur 2.2
