36
Operation and maintenance, Discfilter HPF2200-series PFLC
7.5.2 Using the chain tensioner to achieve correct tension
1. Turn the main power switch to the OFF (0) position and lock with a padlock.
2. Remove the motor cover to access the chain.
3. Remove the flooring tile with the three screws marked blue in figure 7.22. This is done by rele-
asing the tension of the screw and the sliding the tile towards the end of the filter. Then lift the
tile to get access down below.
Figure 7.22 The three screws holding the flooring tile highlighted in blue.
