34
Operation and maintenance, Discfilter HPF2200-series PFLC
7. Insert a new filter panel and press in until it
touches the bottom.
NB Filter panels with steel frames must be po-
sitioned with the filter cloth facing inwards
(see Figure 7.20).
Incorrect installation of the filter panels
can cause damage to the filter segments.
8. Replace the filter segment cover and tighten
the screws.
Maximum tightening torque: 3 Nm.
9. Fit the remaining filter panels and covers in
the same manner.
10. Start operations again as set out in section
5.1.
Figure 7.20 Location of filter panel with steel or plastic
frame.