Draft 3
Printed: 09/07/2003
Page 5
doc: icu_kit_user_maunul_090703.doc
2.2 Disarming System into “Day / unset”
When the system is in “
Day / unset
” the user is in residence and requires no intruder alarm protection. In
“
Day / unset
” mode the PA and all tamper are still active.
Quick key sequence
Press the following keys:
User or secondary user
Detailed Explanation
Enter the premises or protected area first passing through “Zone 1” or any entry/ exit / zones, The control
unit will begin to beep slowly indicating that you must disarm the alarm system within the entry exit time
(30 seconds default entry as with the exit timer, the beeps get faster in the last 10 seconds of the entry
time.
During the entry timer walkthrough zones will also act and entry exit zones also known as time inhibited
zones
User or Secondary user
OK beep, and display shows
“
0 0
”
flashing.
This is the procedure to follow when disarming the system under normal circumstances (i.e. there has been no alarm
condition while the system was armed).
2.3 Part Set arming the system (Omitting Zones)
Quick key sequence
Press the following keys:
User or secondary user
Leave protected area
Detailed Explanation
Press the following keys:
User or Secondary user
OK beep, and display shows
“
0 0
”
flashing.
or or
Exit countdown commences and the control unit beeps slowly, the
displays
shows
“
p 1
”
or
“
p 2
”
or
“
p 3
”
.
During the last 10 seconds of the exit countdown, the beeping gets
faster as a final warning to leave the premises.
Once armed, the display on the control unit will go blank and the external strobe will activate for 5 seconds
confirming the system has set after you have left the premises
If the users attempts to set the system while any zones are open the control unit will provide a bad bleep
and return to day mode, to set the system ensure all windows and doors closed and set the system.
During the exit timer if any “Entry / Exit” zones or “walkthrough” zones are triggered they will be ignored, if
any instant zones are triggered the alarm system will activate a local alarm, sounding the internal
sounders, to silence the alarm the code will need to be entered to cancel the activation.
Exit timer is factory set at 30 seconds.
D
C O
E
D
C O
E
D
C O
E
P2
P3
P1
P1
P2
P3
D
C O
E
