Draft 3
Printed: 09/07/2003
Page 4
doc: icu_kit_user_maunul_090703.doc
2.0 Setting and Unsetting the System
Setting and Un-setting
When arming the system, check that all doors and windows (particularly those fitted with a door/window
contact) are securely closed and that all PIR detectors have an unobstructed view of the areas they cover,
If the users attempts to set the system while any zones are open the control unit will provide a bad bleep
and return to day mode, and will not set. To “set / arm” the system ensure all windows and doors are
closed and set the system.
Once armed, the display on the control unit will go blank and the external strobe will activate for 5 seconds
confirming the system has set after you have left the premises
During the exit timer if any “Entry / Exit” zones or “walkthrough” zones are triggered they will be ignored, if
any instant zones are triggered the alarm system will activate a local alarm and sound the internal
sounders, to silence the alarm the code will need to be entered to cancel the activation.
2.1 Simple Full Arming of the System using the onboard keypad
Before attempting to arm the system, check that all doors and windows (particularly those fitted with a
door/window contact) are securely closed and that all PIR detectors have an unobstructed view of the
areas they cover.
Quick key sequence
Press the following keys:
User or secondary user
exit premises
Detailed Explanation
Press the following keys:
User or Secondary user
OK beep, and display shows
“
0 0
”
flashing.
Exit countdown commences and the control unit beeps slowly,
displays
shows
“
F u
”
flashing.
During the last 10 seconds of the exit countdown, the beeping gets faster as a final warning to leave the
premises.
Once armed, the display on the control unit will go blank and the external strobe will activate for 5 seconds
confirming the system has set after you have left the premises
If the users attempts to set the system while any zones are open the control unit will provide a bad bleep
and return to day mode, to set the system ensure all windows and doors closed and set the system.
During the exit timer if any “Entry / Exit” zones or “walkthrough” zones are triggered they will be ignored, if
any instant zones are triggered the alarm system will activate a local alarm and sound the internal
sounders, to silence the alarm the code will need to be entered to cancel the activation.
The Exit timer is factory set at 30 seconds.
FULL
D
C O
E
D
C O
E
FULL
