P-6
Part #1169256 08/2010
Save Credit Timer
ON - Credit that is established will be displayed for
fi
ve minutes unless someone either
makes a vend or presses the coin return button - whichever comes
fi
rst.
OFF - Credit that is established will remain inde
fi
nitely unless someone either makes a
vend or presses the coin return button.
Force Vend
ON - The consumer will not be able to insert a dollar into the validator, hit the coin return
and receive change without
fi
rst attempting a vend.
OFF - The consumer can insert a bill into the validator, press the coin return button and
immediately receive change.
Multi-Vend:
ON - The consumer may insert enough credit to make multiple vends. The credit will
remain on the display until an additional vend is made or the coin return button is
pressed.
OFF - The consumer is allowed to make a single vend and the credit (if applicable),
will be returned after the completion of the vend.
Deny Escrow
ON - The validator will stack all bills received.
OFF - The validator will not stack the bills, rather it will hold them in escrow until a
vend is complete.
SO Indicator
ON - A small symbol will appear in the lower right hand corner of the display when at
least one column is sold out or the machine detects an error.
OFF - The symbol will not appear.
Count by Selection/Price
COUNT BY SELECTION - Individual sales and cash data will be reported in unit sales.
COUNT BY PRICE - Individual sales and cash data will be reported by vend price.
MIS Reset W/DEX
ON - MIS data will be reset with a DEX read.
OFF - MIS data will not be reset with a DEX read.
MIS Auto Reset
ON - Resets if the counter is checked and after the door is closed.
OFF - Does not reset.
Consumer Overpay
ON - A dollar bill will be accepted even if the correct change light is on and there is
insuf
fi
cient change in the coin tubes.
OFF - A vend will not be allowed when the correct change light is on and the consumer
attempts to use the dollar bill validator.
Summary of Contents for V21
