Vendo V21, User Manual

Page: 24 / 93

G-4
Part #1169256 09/2008
MODEL
SERIAL NO.
MFD IN U.S.A. BY SANDENVENDO AMERICA, DALLAS, TX
DESIGN PRESSURE - PSIg
LOW SIDE 90 HIGH SIDE 295
CHARGE OZ. R-134a AMPS
APPROVED FOR OUTDOOR USE
VOLTS
CYCLE
PHASE 115
60
1
BASIC
UNIT
POWER REQUIREMENTS
REFRIGERATED
VENDING MACHINE
239L
FIGURE 1
NOTE: The Model number of the vending machine is located on the top, left hand corner of
the serial plate.
Do Not use the “BASIC UNIT” number. The BASIC UNIT number is the
cabinet size, which is used on a number of different machines. A typical model number could
read “721TDD00029”. The 721 is the model number, TDD represents the product line of the
vendor, and the remaining digits tell what options are included.