manualshive.com logo in svg

Vendo V21, User Manual

Share
Download
Vendo V21 User Manual Download Page 17

S-13

Part #1169256 

 

 

 

 

 

 

 

 

 

 

               09/2008

SECTION VI:  CONSUMER SAFETY WARNING

WARNING:

VENDOR CAN BE OVERTURNED IF SUFFICIENT FORCE IS

APPLIED AND MAY RESULT IN SERIOUS INJURY OR DEATH.

GENERAL

There have been incidents, including fatalities, when vending machines have been 
vandalized by being pulled over in an attempt to obtain free product or money.

To warn of the danger involved in tipping, shaking, or rocking the vending machine, a 
decal has been designed to be affi xed to vending machines.  (One such decal is applied 
on the vending machine.)  SandenVendo America, Inc. will supply suffi cient decals to be 
placed on all machines, on request.  If you have any questions, contact the Technical 
Services Department of the SandenVendo America, Inc. offi ce in your area.

THE FOLLOWING DECAL SHOULD BE PLACED IN A POSITION 
ON THE VENDOR CONTROL PANEL AT EYE LEVEL

Summary of Contents for V21






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands