- 31 -
Mithos GSM Programmable Thermostat User Manual
book, the index of the corresponding
memory will start to flash (in the example
to the side, the number is in position 4).
Adding a number to the telephone book
Numbers can be added to the telephone book with a simple telephone ring, without
the need to send a text message. To do this, from the GSM function page:
➢
hold down the “PRG” key for 3 seconds.
The position of the telephone book where you can store the new number will
start to flash, whereas all the already occupied positions will remain on fixed
➢
press the
“
”
and
“
”
keys to select the position in the telephone book
where you want to store the number
➢
carry out a ring tone with the number you want to add to the telephone book.
The caller will receive a text message from Mithos GSM confirming that the
addition was made (to exit without recording a new number, press the “PRG” key
for 3 seconds).
Note: if the position in the telephone book is already occupied, it is
overwritten with the new number.
MANAGING THE PROGRAMMABLE THERMOSTAT
Activating/deactivating with a ring
The numbers in the telephone book switch the operating mode simply with a
telephone ring, according to the following rules:
• if in automatic operation, after the ring it will switch to off operation (with the
antifreeze temperature, if enabled)
• if in manual operation, after the ring it will switch to off operation (with the
antifreeze temperature, if enabled)
• if in off operation, after the ring it will switch to the operating mode it had prior to
being shut off (automatic or manual)
