English
- 9 -
Mithos GSM Programmable Thermostat User Manual
INITIAL START-UP / RESET
•
Connect the output, power supply and,
if present, the expernal probe (or digital
input) in accordin to the diagram shown in
page 4.
After applyng power, all the display
segments will turn on and the relay will
be activated for 3 seconds; after this, the
clock field
(22)
will start at 12:00 and will
flash until the clock is set.
Attention
if the clock is not set,
the programmable thermostat
will not adjust; it will start doing
so only once the clock is set.
CLOCK SETTING
•
Press the
“ ”
key; on field
(16)
seconds will run flashing, while field
(22)
will display digits for minutes and hours.
Press
the
“
”
key to reset seconds
and increase the minute field by 1 or
“
”
to reset the seconds field.
Press
the
“ ”
key to confirm.
(In case the setting of the clock takes
place after a reset, the first parameter to
set will be the “ minutes" field).
