VRC801D2
VELLEMAN
6
1. Switch on the device (e.g. TV, DVD) which you wish to control, if the device is VCR, please
insert a video cassette.
2. Press the SET key on your remote control for more than 3 seconds before releasing it.
3. Press the UP or DOWN keys to select to CODE SETUP in the LCD menu, and press the
OK key.
4. The screen shows the DE V SE ARCH in the LCD menu, and press OK key, then press
device key
to select your desired operation device(e.g. TV) and then press OK key to start the
Auto Search.(In this case, you have to aim the remote control directly at the device which
you wish to control)
5. Check whether the device reacts or not. As soon as the device reacts, press any key to stop
the search.
6. Check whether majority of the keys function correctly or not. If the majority of the keys do
not function correctly, please press UP or DOWN key to select another code.
7. Once you are satisfied with the code, simply press OK to save it. Success is displayed on the
LCD screen and the set-up is exited. You can press device key again to exit SET UP or use
UP or DOWN to select another set-up.
Remark:
1. If you did not manage to stop the search when the device reacted, use the UP or DOWN
key to search for the code again.
2. During the automatic search, the
OK, EXIT keys are only used to set up
your new remote control. These keys can not be used for normal menu functions until you
exit set-up.
3. Once the remote control has searched all the codes, it stops the search at the first code.
4. If the device has been locked, it has to be unlocked before you can carry out the set-up.
Set-up by Enter Code
1. Switch on the device (e.g. TV, DVD) which you wish to control.
2. At the back of this user manual there is a list of brand names and code numbers for your
device make (e.g. Lifetec 003,010,062).
3. Press the SET key on your remote control for more than 3 seconds before releasing it.
4. Press UP or DOWN keys to select to CODE SETUP in the LCD menu, and press the OK
key.
5. The screen shows the DEV SE ARCH in the LCD menu, press the UP or DOWN keys to
select CO DE SET UP in the LCD menu, and press OK key.
6. Subsequently press the device key of the device which you wish to control (e.g. TV, DVD…)
and then press OK. Now enter the 3-figure code (eg.003 for Lifetec TV set).
7. Press OK to save the code and Success is displayed on the LCD screen. Press exit twice to
exit set-up mode.
8. Check whether majority of the keys function correctly or not. If the majority of the keys do
not function correctly, please press try another 3-figure code (e.g. 010…) listed under the
same brand name in the code list. Repeat steps 3 to 7 until all basic functions function
