VRC801D2
VELLEMAN
8
2. All usual function keys can be learnt except Show View Macro, Set, Learn, All off .
3. You may not be able to program some codes formats from this remote control.
4. It is possible to program approx. 100keys for 8 devices.
Deleting programmed Key
If you wish to delete a programmed command, proceed as follows:
1. Press the device key (e.g. TV) of the device at which the command is to be deleted.
2. Press the SET key for more than 3 seconds before releasing it.
3. Press the UP or Down key to select Learning in the LCD menu, then press OK key.
4. Press the UP or Down key to select Delete Key in the LCD menu, then press OK key.
5. Press the remote control key which you wish to delete, SURE DELET is displayed on the
LCD Screen, press OK to confirm this query. Success is displayed on the LCD screen.
6. Repeat Step 4-5 to delete the next desired keys.
7. Press a device key (e.g. TV) to exit the deleting operation once all the desired remote
commands have been deleted.
Deleting All the programmed commands for a Device
If you wish to delete all the programmed commands in a device at once and not one after the
other, proceed as follows:
1. Press the device key (e.g. TV) of the device at which the command is to be deleted.
2. Press the SET key for more than 3 seconds before releasing it.
3. Press the UP or Down key to select Learning in the LCD menu, then press OK key.
4. Press the UP or Down key to select Delete DEV in the LCD menu, then press OK key.
5. Select the device which you wish to delete and press OK.
6. SURE DELET is displayed on the LCD screen, press OK key to confirm this query.
SUCCESS is displayed on the LCD screen.
7. Repeat step 5 to delete all the commands of another device key.
8. Press EXIT key to exit the deleting operation.
Remark: It will take about 3 minutes for delete all commands in one device. If the commands are not so
many, we suggest you delete commands one by one.
Deleting All the programmed Keys
If you wish to delete all the programmed commands in the remote control, proceed as follows:
1.Press the SET key for more than 3 seconds before releasing it.
2.Press the UP or DOWN key to select Learning in the LCD menu and then press OK.
3.Press the UP or DOWN key to select Delete All in the LCD menu and then press OK.
4.Sure Delet is displayed on the LCD screen, press OK to confirm this query.
Success is displayed on the LCD screen.
