VRC801D2
VELLEMAN
11
exit this function.
1. Press the SET key for more than 3 seconds before releasing it.
2. Press the UP or DOWN key to select CO NFI GURE in the LCD menu, and then press
OK .
3. Press the UP or DOWN key to select DEV LOCK in the LCD menu, and then press OK .
4. Press the device key to select the device which you wish to fix, e.g. TV (or DVD, DVB…)
5. Press the
or
key to change to the ON or OFF mode.
6. Press OK key to save the setting and SUCCESS is displayed on the LCD screen.
Subsequently return to the current set up status. You can press any device key to exit the
setup or press exit key to return to the last status or use the UP or DOWN key to select
another set-up.
Remark:
It is possible to fix all device codes, however, these device codes can not be changed via brand name code or automatic search
setup.
D. Background Light
If the backlight has been switched on, it lights up if you press a key.
1. Press the SET key for more than 3 seconds before releasing it.
2. Press the UP or DOWN key to select C ONF IGUR E in the LCD menu, and then press OK .
3. Press the UP or DOWN key to select Light in the LCD menu, and then press OK .
4. Press the
or
key to change to the ON or OFF mode.
6. Press OK key to save the setting and SUCCESS is displayed on the LCD screen.
Subsequently return to the current set up status. You can press any device key to exit the
set- up or press exit key to return to the last status or use the UP or DOWN key to select
another set-up.
E. Setting the contrast
If you are not satisfied with the screen contrast setting of your remote control, proceed as
follows:
1. Press the SET key for more than 3 seconds before releasing it.
2. Press the UP or DOWN key to select C ONF IGUR E in the LCD menu, and then press the
OK .
3. Press the UP or DOWN key to select Contrast in the LCD menu, and then press the OK
4. Press the
or
key to adjust the contrast, press OK once you are satisfied with the
setting.
Success is displayed on the LCD screen.
5. You can press any device key to exit set-up, or press the exit key to return to the last status
or use the UP or DOWN key to select another set-up.