VRC801D2
VELLEMAN
9
The Macro Function
Setting up macros
Carry out successive operations for your home entertainment centre with the aid of the macro
function.
Set up a macro as follows:
1.
Press SET key for more than 3 seconds before releasing it.
2.
Press the UP or DOWN key to select Macro in the LCD menu and then press OK.
3.
Press the UP or DOWN key to select Macro 1 or Macro 2 or Macro 3 in the LCD menu,
Subsequently press OK.
4.
SET UP is displayed on the LCD screen, press OK to confirm.
SELECT KEY is displayed on the LCD screen.
5.
You can select the device and function key for a successive operation (e.g. TV + POWER +
MUTE + AV, DVD + PLAY, VCR + RECORD, etc... You wish to switch the TV set on and
the sound off, switch the TV set and input to AV input, to start the DVD to play a disc while
the VCR starts recording at the same time).
6.
Press OK to save the setting. Success is displayed on the LCD screen.
7.
You can press any device key to exit set-up, or press the EXIT key to switch to the last
status or use the UP or DOWN key to select another set-up.
Remark:
1.
A maximum of 10 commands can be set up in a macro.
2.
Ensure that all the keys can transmit signals; otherwise, even if you have programmed these
Keys into the macro, the macro will not function correctly. Check key functioning before
setting up the macro by pressing them to see whether the device keys flash or not.
3.
Please observe that certain conditions have to be fulfilled if you wish to carry out a macro.
For example, a disc or video cassette has to be inserted into the DVD player or VCR
respectively if you wish to play a DVD or tape a programme with the VCR.
Operate Macro
Press and hold Macro key and 1 key (or 2, 3 key) and then release them. The remote control
will send out a sequent IR commands that you programmed before.
Deleting Macro
1.
Press SET key for more than 3 seconds before releasing it.
2.
Press the UP or DOWN key to select Macro in the LCD menu and then press OK.
3.
Press the UP or DOWN key to select Macro 2 in the LCD menu, and then press OK.
4.
Press the UP or Down key to select Delete in the LCD menu and then press OK.
5.
Sure Delete is displayed on the LCD screen. Press OK to confirm the deleting operation
