![background image](http://html1.mh-extra.com/html/veldink4kids/adapt/adapt_instructions-for-use-manual_3887547035.webp)
Adapt
35
Figure 32: Incorrect positioning
12.2.1
Positioning belt
The positioning belt is used to bring the occupant into the correct position. As a rule, the belt is
attached to the outside of the orthosis with a cam buckle. If this is not possible, the cam buckle
can be mounted in the holes (M5) provided (see Figure 33).
Figure 33: Hole pattern for attaching the belt
Warning: Under no circumstances may the belts and positioning aids that come with the
product be used as part of a passenger restraint system in vehicles for transporting per-
sons with reduced mobility. Note that the belts and positioning aids that come with the
product are intended only as additional support for the user sitting in the product.
12.2.2
Restrictions for use
Before using the product as a seat in a vehicle for transporting persons with reduced mobility,
remove options that need to be taken off for safe transportation in such a vehicle. Please observe
the table below.
Stow all dismantled options securely in the vehicle for transporting persons with reduced mobil-
ity.
The options/accessories listed below
that are not relevant for positioning
must
be detached
from the product and safely stowed in the vehicle for transporting persons with reduced mobility:
One-arm drive
Mud cruiser outdoor wheel attachment
Summary of Contents for Adapt
Page 1: ...Adapt Instructions for use...
Page 41: ...Adapt 41...
Page 42: ...Adapt 42...
Page 43: ...Adapt 43...