Adapt
19
Figure 7: Adjusting the push bar
Figure 8: Adjusting the height
9.2.2
Aligning the handle screw
After tightening, you can use the red button to align the handle screw with the push bar.
1.
Press the red button with your thumb and pull the screw up with your index and middle fin-
gers.
2.
Turn the screw to the desired position.
3.
Lower the screw back down.
Figure 9: Aligning the rotary knob
Summary of Contents for Adapt
Page 1: ...Adapt Instructions for use...
Page 41: ...Adapt 41...
Page 42: ...Adapt 42...
Page 43: ...Adapt 43...
