Adapt
26
10.4
Anti-tipper
The anti-tipper prevents the mobility base for seating shells
from tipping backward. The anti-
tipper can be deactivated, for example when crossing obstacles.
10.4.1
Adjusting the anti-tipper
1.
Lift the lever on the plastic clamp (see Figure 21).
2.
Pull or push the inner tube backward or forward by the wheel to determine how far the
product can tip backward.
Figure 21: Adjusting the anti-tipper
10.5
Seating unit
10.5.1
Tilting the seating unit using the hand control lever
1.
To tilt, operate the tilt control lever (see Figure 22) located on the attachment rod of the
push handle.
2.
Now push or pull on the push bar with your hands and tilt the seating unit to the desired
position.
3.
Release the tilt control lever again.
The seating unit engages in the tilt plate.
Figure 22:
Tilt mechanism control lever
Summary of Contents for Adapt
Page 1: ...Adapt Instructions for use...
Page 41: ...Adapt 41...
Page 42: ...Adapt 42...
Page 43: ...Adapt 43...
