![background image](http://html1.mh-extra.com/html/veldink4kids/adapt/adapt_instructions-for-use-manual_3887547033.webp)
Adapt
33
The Adapt can rotate about its own axis. Bear in mind you will need a turning circle
with a diameter of ±1.00 m for potential manoeuvring in the transport vehicle.
Figure 28: Rear attachment points
Figure 29: Front attachment points
The Adapt must be positioned so that the user faces forward. The mobility base for
seating shells must be secured according to the instructions from the manufacturer of
the wheelchair restraint system.
The Adapt must be secured by a restraint system suitable for the anchor points (see
Figure 28, Figure 29).
The user must be secured by an approved WTORS (wheelchair tie-down and occupant
restraint system).
The user must be secured in the transport vehicle by an approved 3-point safety belt.
These safety belts must be attached to the transport vehicle.
The lap belt must sit low on the user's waist. The angle between the belt and the floor
surface must be in the range of 30° to 75° (see Figure 30).
Summary of Contents for Adapt
Page 1: ...Adapt Instructions for use...
Page 41: ...Adapt 41...
Page 42: ...Adapt 42...
Page 43: ...Adapt 43...