VELBUS INSTALLATION GUIDE
©2015 Velbus
34
www.velbus.eu
Changing electronic addresses
All Velbus modules need to have a unique address. (In this manual we will use
hexadecimal representation. See “
22 for more).
With a new installation, most modules will probably appear with exclamation
marks
next to them. This is simply because every new module with
electronic addressing will be provided with the
address “FF” by factory
default
3
. As the system does not allow duplicate addresses, it displays
exclamation marks next to these addresses.
You now need to assign a valid address to all modules that still have a
n “FF”
address. If there are modules with duplicate address, neither you nor the
software will be able to effectively communicate with them.
3
Modules with rotary switches for setting addresses need their address to be set
beforehand. All recent modules however have electronic addresses.
Summary of Contents for VMB4RYLD
Page 1: ...Installation Guide ...
Page 2: ...v 2015 08 04 ...