VELBUS INSTALLATION GUIDE
©2015 Velbus
49
www.velbus.eu
The icon key can be shown by pressing the “legend” button at the bottom
of
the main window.
CHANGING
FEEDBACK
CHARACTERISTICS
OF
INPUT
MODULES
By default any feedback provided by an input module, be it a VMB8PBU, a
VMBxPBN or a VMBGPxxx, will represent the state of the output connected to
it. For instance, if a relay channel is connected to a button, the default
behaviour of the button LED will be: feedback LED on when relay is closed,
feedback LED off (or dimmed, when configured to serve as a locator or
orientation lamp) when relay is off. Feedback LEDs can also blink, for instance
when a dimmer is dimming, a timer is running, a blind is going up or down, et
cetera.
In some situations, you may want to change this default feedback behaviour,
for instance to link the feedback LED of a button to a different output than the
default one it has been associated with. This can easily be accomplished in
Velbuslink.
For example, you may have a button in your living room commanding the
ceiling light. Since the but
ton is close to the light, you don’t need the feedback
Summary of Contents for VMB4RYLD
Page 1: ...Installation Guide ...
Page 2: ...v 2015 08 04 ...
