Installation
Fuel Conditioner (FC) Installation
16
STP Adapter Assembly Installation - The Red Jacket STP
Turn off the electricity, tag and lockout the electrical power switch to the
dispenser/pump. Relieve pump pressure before proceeding with this
installation.
1. Get the STP Adapter Assembly from the kit.
2. Remove one of the siphon port plugs from the STP (see Figure
13).
Figure 13. Locating TRJ Siphon Port Plugs
3. Lubricate the two o-rings of the STP Adapter Assembly with petroleum jelly and install the assembly into the
siphon port of the STP and tighten securely (see Figure
14).
Figure 14. TRJ Pump Siphon Port Assembly
