background image

  S-19-01-1125-UV101 V1.3 

15 

13. Warranty 

 
13.1 Malfunction 
Vector R & D hereby warrants that for a period of one year from the delivery date, this device shall be 
free from defects in material and workmanship. In case the machine is found malfunctioned under 
normal use, Vector R & D will offer service of free maintenance and parts for replacement. 
 
13.2 Repair 
Repairs must be  only carried  out by an authorized  Vector R & D engineer/dealer.  If  repairs  during 
warranty period are not carried out by an authorized engineer/dealer, warranty will expire immediately. 
 
13.3 Warranty Exception 
 
The warranty stated herein is the sole warranty applicable to  Vector R & D products. Vector R & D 
expressly disclaims the liability for warranty even within warranty period, if 
 
(1) Damages caused by natural disaster. 
(2) Operator's fault or wrong operation. 
(3) Application use other than field specified in this instruction. 
(4) A malfunction or damage caused by repair, adjustment, modification which is not carried out by 
Vector R & D authorized technicians/dealers. 
(5) A malfunction caused by abnormal power source or voltage. 
(6) It is a consumption part.

 

 
(This instruction subjects to change without pre-notice) 
 

Summary of Contents for LED-P
















Reviews: