S-19-01-1125-UV101 V1.3
14
CAUTION:
The charging base shall be unplugged before cleaning and disinfection of the
charging base to prevent from electric shock.
CAUTION:
To immerse or spray the out surface of charging base and handpiece with water,
cleanser and chemical disinfectant is not allowed as it may result in electric shock and damage of inner
circuit board.
10.2 Clean Charging Base, Handpiece, and Glare Shield
►
To disinfect all components, spray the disinfectant on a towel and use it to disinfect the unit. Do not
spray the disinfectant directly on the handpiece or the charging base.
►
Clean the keypad glass of the handpiece with a soft and fluff-free cloth.
►
Dry residual disinfectants on the charger, the handpiece and the glare shield with a soft and
fluff-free cloth, as they damage the plastic components.
►
Clean the charging base, the handpiece and the glare shield with a soft cloth and, if required, a mild
cleaning agent.
►
Solvents or abrasive cleaners may not be used in any case, as they damage the plastic components!
►
Make sure that charge connector remains dry and is not contacted by metallic or greasy parts. Do
not bend the charge connector during drying. Wet charge connector will cause an operating error.
11. Disposal
Follow the national requirement and regulation to dispose of the unit.
As a mean of protection of the environment, your new device is equipped with lithium battery. This kind
of battery is free from toxic heavy metal ions. Dispose of battery and units in accordance with local legal
regulations.
12. Disclaimer
VECTOR R & D considers itself responsible for the effects on safety, reliability and performance of this
product only if:
►
Assembly operations, extensions, re-adjustments, modifications or repairs are carried out by
persons authorized by VECTOR R & D.
►
The electrical installation of the relevant room complies with the requirements.
►
The equipment is used in accordance with this instruction for use.
