S-19-01-1125-UV101 V1.3
5
3. PRODUCT DESCRIPTION & FIELDS OF APPLICATION
The Vector LED-P curing light is a pen-style, cordless, high-performance LED light source curing unit
intended for polymerization of resin-based light cured dental materials by dental professionals. Vector
LED-P incorporates 5W blue LED to achieve high energy output with wavelength range of 440 to 480nm
to polymerize resin-based composite in the market and a high power mode to produce super fast curing
effect. The relevant range is for camphorquinone (CQ) containing product. Though the majority of
light-curing dental materials are responsive in this range of wavelengths, it is suggested you should
contact the filling material maker to make sure it before use.
The Vector LED-P LED curing light is a fast-curing LED curing light. It emits typical light output at about
1,400 mW/cm². 3 Seconds to cure most resin-based composite in the market. It also features:
►
Digital timer display, multiple mode selection: boost (fast curing) and ramp up (soft start),
►
Two button easy operation,
►
Quiet operation, fan-free design,
►
Rubber button for more comfortable finger touch, and resist water or solution when cleaning up.
►
Can be used both cordless and corded,
►
Low battery warning; for urgent use, just insert power cord connector into handpiece,
►
Rechargeable lithium battery inside,
capable of 200 x 10 sec curing cycles prior to recharging,
►
Slim and ergonomic handpiece for most comfortable hand holding, (weight 155g only)
►
8
mm
diameter
sterilizable
curing tip
,
►
Curing tip rotates 360
∘
for curing at any position of mouth,
►
Versatile fiber optic curing tip optional,
4. PACKAGE CONTENT
．
Charging Base Assembly
X 1 PCE
．
Vector LED-P Hand piece Assembly
X 1 PCE
．
8 mm Diameter, Sterilizable Fiber Optic Light Guide
X 1 PCE
．
Protective Eye Shield
X 1 PCE
．
Wall Plug-in Power Supply
X 1 PCE
．
Instructions For Use
X 1 PCE
