Vector Graphic Bitstreamer II, User Manual

Page: 51 / 54

1. The pads in jumper area K (shown as small circles within area ~) should be
numberad 1 to 8 from the left. There are no numbers next to these small
circles no',,;, at all. .Just below area K,
"VIO"
should read
"VI"
instead.
Notel:."1atthe numbers
00101,-/
the bus connectors shovV!1be 1
0',,,
area K corresfX)nd
to the names of the VI lines in the S-100 bus, and they are correct as
shown.
2. The dotted lines in jumper area A and connecting pad A-8 to pad K-8 should
not be there, because no jumpers are in the factory conEi9uration.