For this purpose, the engine must be in a hot state, i. e. it must have operating temperature in order that abraded particles are drained together with
the oil. Unscrew the two oil drain plugs. Clean the magnet in the screw (3). Replace the sealing rings, if necessary.
4.5. Clutch and Brakes
nächster Punkt
;
Index
Clutch
Adjust the clutch clearance of 3 mm by means of the adjusting screw (1). Lock the adjusting screw again. If the adjusting screw (1) is no longer
sufficient for correcting the adjustment, then correct the coarse adjustment. For this purpose, slacken back the lock nut (Fig.
17
) for one revo-
Fig. 16. Adjusting the clutch (also mechanical brake) at the hand lever
(1) Adjusting screw with check nut
(S) Clutch clearance
Bedienungsanleitung für MZ-Motorrad ETZ 125 und ETZ 150 (englisch)
http://www.mz-b.de/miraculis/aw/mz/text/etz15be/etz15be.html
30 von 63
03.11.2008 01:31
