Before any ride, check the vehicle for reliability of operation and roadworthiness according to the Maintenance Chart (see Section
4.2.
).
Starting
Shift the gearbox to neutral position (Fig.
7
).
1.
Switch an the ignition system (Fig.
3
).
Control light for dynamo will light.
Control light for idling will light (de luxe model).
2.
Open the fuel shut-off cock (Fig.
6
).
3.
With the engine in a cold state:
Open the cold-starting device (Fig.
5
).
With the engine in a hot state:
Leave the cold-starting device in the closed position.
4.
With the engine in a cold state:
Throttle-twist grip is in the neutral position.
With the engine in a hot state:
Open the throttle-twist grip for about one quarter of a revolution.
5.
Vigorously actuate the kick-starter.
6.
Close the cold-starting device when the engine readily accepts gas.
7.
Notice!
In the case of extremely low ambient temperatures, and when the engine has been subjected to several starting trials in vain, allow the engine to
rest for 20s in order that fuel in the cold-starting device can be restored to normal level.
Driving
The temperature of the engine need not be raised when the vehicle is stationary, it rises during road operation. Actuate the clutch lever and shift gears,
starting with the first gear in engagement. The operating ranges of the various gears are shown in Figs.
10
and
11
.
Notice!
Only use the clutch for moving off and for shifting gears. When stopping for a prolonged period of time, shift to the neutral.
Bedienungsanleitung für MZ-Motorrad ETZ 125 und ETZ 150 (englisch)
http://www.mz-b.de/miraculis/aw/mz/text/etz15be/etz15be.html
18 von 63
03.11.2008 01:31
