Index
If your ETZ is provided with an oil proportioning device, please, observe the following instructions in addition to the explanations given in the
general Operating Instructions.
Fuel
Octane rating 88
without
admixture of oil
Engine lubrication
Branded two-stroke oil. The oil is kept in the oil container under the intake silencer (capacity about 1.3 l) and is pumped
into the crankcase by means of a Mikuni oil pump.
Actuation of the
pump
By means of the throttle twist-grip
Range of operation
Depending an the driving habit, up to about 1,600 km with one oil filling
Putting into
operation
Will be carried out by the seller in accordance with the instructions given by the manufacturer (trailer under the oil filler
plug)
Care and
maintenance
Before any ride:
Checking the oil level in the oil reservoir (oil sight glass or marking at the lower part of the screw plug)
After every 2,500
km:
Checking the actuating cable control for wear and the oil pipes for tight fit.
After every 5,000
km:
lubricating the actuating cable control
checking the setting of the pump and, if required, re-adjusting it (Fig.
40
)
When the markings (3) are
not opposite
, then
remove the idling speed by screwing out the stop screw for the throttle valve (7, Fig.
21
);
1.
set the engine speed to 1,200 to 1,500 rpm by means of the throttle twist-grip;
2.
Bedienungsanleitung für MZ-Motorrad ETZ 125 und ETZ 150 (englisch)
http://www.mz-b.de/miraculis/aw/mz/text/etz15be/etz15be.html
61 von 63
03.11.2008 01:31
