chain connecting link must be inserted so that the open end is opposite to the sense of rotation.
4.9. Electrical Equipment
nächster Punkt
;
Index
Take care to see to it that the insulation of the cables and electrical devices is always in proper condition and that all line connections are tight and
free from oxide. Never replace blown fuses by other metal objects.
Electrical welding operations in the motor-cycle should only be done after the disconnection of the battery. No positive line must get into contact
with the welding electrode.
Three-phase current dynamo
The three-phase current dynamo does not require any care. The charging-control lamp flashes up when the ignition system is switched on and will go
out when the engine has started up. Faults are given when the control lamp fails to flash up or emits a dim light only upon switching an the ignition
system or when it fails to go out when the engine is running.
Bedienungsanleitung für MZ-Motorrad ETZ 125 und ETZ 150 (englisch)
http://www.mz-b.de/miraculis/aw/mz/text/etz15be/etz15be.html
47 von 63
03.11.2008 01:31
