re-adjust the cable control by means of the setting screw (2) until the markings coincide;
3.
set the idling speed to 1,200 to 1,500 rpm.
4.
Repairs
The oil pump is not intended for repairs. If required, have a new pump installed.
The fastening screws have to be tightened uniformly with a torque of maximum 2.5 Nm in order that the fastening
flange of the pump will not be distorted.
Before putting into operation the new pump, bleed it (1, Fig.
40
) and newly adjust the pump.
Bedienungsanleitung für MZ-Motorrad ETZ 125 und ETZ 150 (englisch)
http://www.mz-b.de/miraculis/aw/mz/text/etz15be/etz15be.html
62 von 63
03.11.2008 01:31
