72
Sensor types connected to the NMEA 2000 network
Note
: the underlined value/command is the default value/command. The units of measure depend on
parameter
SYSTEM CONFIG
>
Units
Setting
Description
Possible
values/commands
Compass
>
Heading
offset
Alignment between compass bow and boat bow.
± 0.0 – 180 ° (0 °)
Compass
>
Variation
Alignment between the magnetic North and true North.
± 0.0 – 180 ° (0 °)
Wind
>
Wind direction
offset
Alignment between the wind sensor position and longitudinal boat axis.
± 0.0 – 180 ° (0 °)
Depth
>
Keel depth
Distance between the transducer and keel to calculate free water.
0 – 9.9 m (2m)
Rudder
>
Rudder offset
Alignment between the sensor center and counter-rudder blade.
± 0 – 120 ° (0 °)
Speed
>
Speed
correction factor
Alignment between the sensor Speed through water (STW) and real boat
speed. See "Calculate the speed offset factor" below.
0 – 199.99 (1.00)
Calculate the speed offset factor
The speed offset factor lets you align the speed through water (STW) to the actual speed. If the
measured speed differs from the real boat speed for more than 0.5 kn, this factor can be adjusted.
Increasing the offset factor reduces the displayed speed through water (STW).
Sensor configuration
7” TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG
Summary of Contents for OCEANLINK -
