VDO OCEANLINK -, Operating Instruction

Page: 62 / 204

62
Alarms on several displays
If there are several OceanLink displays on the NMEA 2000 network, simply configure alarms from one
of the devices. Configuration is automatically transmitted to the others.
When an alarm triggers, the Alarm page appears on all displays. After acknowledging the alarm from
one device, the page disappears on all others.
Menu description ALARMS
Alarm Description
Possible
values/commands
Default
Depth shallow Low water minimum threshold 0–9.9 m
2 m, buzzer Yes
Depth navigation Maximum threshold. For example, a value near the maximum
value measurable by the sensor.
Safety depth minimum threshold 0 – 99.9 m
0 – 99.9 m
50 m, buzzer No
5 m, buzzer No
Wind Wind speed maximum threshold 0 – 99.9 km/h
39.9 km/h,
buzzer No
Battery Battery voltage minimum threshold 0 – 32.9 V
10.8 V, buzzer
Yes
Engine water temp Water temperature maximum threshold 0 – 139 °C
110 °C, buzzer
Yes
Engine oil temp Engine oil temperature maximum threshold 0 – 149 °C
120 °C, buzzer
Yes
Engine oil pressure Engine oil pressure minimum threshold 0 – 9.9 bar
0.5 bar, buzzer
Yes
Fuel Fuel level minimum threshold 0 – 99 %
20 %, buzzer
Yes
Fresh water Fresh water minimum threshold 0 – 99 % m
20 %, buzzer
Yes
Waste water Waste water maximum threshold 0 – 99 %
80 %, buzzer
Yes
Local alarm input
Connected digital sensor alarm (low active alarm). Refer to the
Installation instructions .
- -
Min RPM Engine revolutions minimum threshold. Only values under the
threshold will be considered to trigger engine alarms.
0 -990 rpm 300 rpm
CAN Alarm access from CAN bus (NMEA 2000 and J1939). See
"Managed alarms list" on the facing page - -
Alarm management
7” TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG