VDO OCEANLINK -, Operating Instruction

Page: 49 / 204

On/Off
The on/off mode depends on the connection made during installation.
The VDO logo and software version followed by a security message appear when turned on followed by
the last data page viewed before turned off.
Page Calibration wizard
Page Calibration wizard appears when first turned on after reset and every time turned on until
sensors are calibrated.
The display prompts you to configure sensors. Choose Yes , to open menu SENSOR CONFIG . Choose
No , to display the first default data page and sensors can be configured later.
Button functions
Button Function
Briefly press:
l
Open the menu
l
Return to the previous menu
Hold down:
l
From any point to return to the data pages
Briefly press:
l
Scroll pages/options
Pressed simultaneously:
l
Set the display and connected 52 mm gauges brightness
Briefly press:
l
Open a sub-menu
l
Confirm the selection
Hold down:
l
In the MediaBox page to save the selected station radio frequency
Briefly press:
l
View the data page linked to the button
Hold down:
l
Link the button to the displayed data page
Configure the display
Following are the steps for initial configuration:
1. Connect any sensors to analog inputs.
2. When turned on, read the security message, then select
Yes to open the menu SENSOR CONFIG
and configure sensors (see "Sensor configuration" on page 64).
3. Set up general device operations (see "System settings" on page 57).
4. Add/remove data pages selecting the best layout and data to be viewed (see "Data page
configuration" on page 53).
49
Getting started
7” TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG