manualshive.com logo in svg

VCS VideoJet 10, Manual

Share
Download
VCS VideoJet 10 Manual Download Page 43

Configuration with web browser

45

VideoJet 10

Software update

Software upload:

The VideoJet 10 is designed in such a way that its functions and 
parameters can be updated with firmware. In such cases, transmit 
the updated firmware package via the selected network to the 
device. On termination of the connection, the firmware will be auto-
matically installed.

This allows a device to be remotely serviced and updated without a 
technician having to modify the device installation on site. 

The latest firmware can be obtained from your VCS Service centre.

"

Store first the update files to the hard disk.

"

Enter the complete directory path for the update file in the text field 
or click on the button 

Durchsuchen... 

to locate and select the file.

"

Click on the button 

Upload

 to begin the transmission to the unit. 

The progress of the download can be monitored from the status 
messages and from the progress bar.

On conclusion of a successful upload, the unit will automatically 
restart.

If the LED 

Power

 flashes in turns red and green on conclusion, the 

upload has been unsuccessful and must be restarted. In order to 

Warning!

Before starting the firmware upload, ensure that you have selected 
the correct upload file! An upload of other files can result in the 
device being no longer addressable and having to be replaced. 

On no account interrupt the installation of the firmware. An interrup-
tion will result in damage to the flash EPROM. This can result in the 
device being no longer addressable and having to be replaced. 

Summary of Contents for VideoJet 10







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands