VCS VideoJet 10, Manual

Page: 38 / 70

Configuration with web browser
40
VideoJet 10
Serial port function:
Select the function for serial port 2. Select Terminal if the unit is to
be operated from a terminal. If the port is required to transmit trans-
parent data, select the entry
Transparent .
Baud rate:
Select the value for the Transmission rate in bits/s.
Data bits:
Select the number of data bits per character.
Stop bits:
Select the number of stop bits per character.
Parity check:
Select the type of parity check.
Network settings
The settings on this page are used to integrate the unit into an exist-
ing network.
Unit IP address:
Enter here the required IP address for the VideoJet 10. The IP
address must be valid for the network.
Warning!
If the IP address is altered and the new configuration is transferred
to the VideoJet 10, then the unit can only be accessed via the new
address.