vc999 RS420, Maintenance Manual

Page: 14 / 157

INSTALLATION
LOADING AREA
•
Using eight (8) M6x25mm socket head screws provided, install the loading area as
shown below.
•
Use Loctite or similar substance when reassembling the machine.
•
Reattach cable straps using M5 socket head screws provided.
•
Remove stainless steel end caps to the forming and sealing station in preparation for
the chain installation.
LEVELING MACHINE
•
Level the machine in machine direction as well as across the die tops in the order
indicated by the numbered arrows in the diagram below.
•
It is critical that each die section be level.
o
This is best achieved by raising the machine slightly with a pallet jack and turning
the feet.
•
Be careful to leave at least 10mm of the feet engaged into the machine for
stability.
•
Never attempt to operate a machine that has not been properly leveled.
o
This could result in damage to the machine.