Vauxhall 2011 Astra Owner'S Manual Download

Page: 47 / 239

Seats, restraints

Curtain airbag system

The curtain airbag system consists of

an airbag in the roof frame on each

side. This can be identified by the

word AIRBAG on the roof pillars.
The curtain airbag system is triggered

in the event of a side-on impact of

a certain severity. The ignition must

be switched on.

The inflated airbags cushion the

impact, thereby reducing the risk of

injury to the head in the event of

a side-on impact considerably.

Warning

Keep the area in which the airbag

inflates clear of obstructions.
The hooks on the handles in the

roof frame are only suitable for

hanging up light articles of

clothing, without coat hangers. Do

not keep any items in these

clothes.

Airbag deactivation

The front passenger airbag system

has to be deactivated if a child

restraint system is to be fitted on this

seat. The side airbag and curtain

airbag systems, the belt

pretensioners and all driver airbag

systems will remain active.

The front passenger airbag system

can be deactivated via a key-

operated switch on the right side of

the instrument panel.

Summary of Contents for 2011 Astra
















































































































































































































































Search results

Summary of Contents for 2011 Astra

Reviews:

Related manuals for 2011 Astra

Brands by name

Popular brands

Vauxhall 2011 Astra, Owner'S Manual

Search results

Summary of Contents for 2011 Astra

Reviews:

Related manuals for 2011 Astra

Brands by name

Popular brands